IviumStat.XRe ( ±2A/±50V FRA/EIS: 10µHz to 8MHz )

Scan range: ±2A/±50V

 FRA/EIS: 10µHz to 8MHz

Product description

Wide application range: 

The IviumStat.XRe is well suited for applications requiring a wide dynamic range, such as battery testing, corrosion measurements and electrochemical research applications. It has a power of ±2A and low current ranges down to 1pA full scale, as well as a ±50V compliance voltage.

Complete solution: 

The IviumStat.XRe offers a complete package, all the standard Electrochemical techniques are included. The IviumStat.XRe also has an integrated  high-performance Frequency Response Analyser for EIS measurements from 10µHz to 8MHz. All measurement and dataprocessing software is included (for Windows based PCs).


The compliance (maximum current or potential) of the instrument can be defined by the operator. Thus valuable samples may be protected, and unsafe situations prevented.


Multiple analog and digital input & output ports are available for monitoring & control of peripheral equipment. This functionality is fully integrated in the software.


The IviumStat.XRe can be expanded with a wide variety of options and modules, including a Bipotentiostat, True Linear Scan generator, various power boosters, multiplexer and FastScan.


  • Automatic current range selection: 1pA to 10A/1mV to 10V (50V)
  • Automatic variable noise filter and potentiostat/galvanostat stability settings
  • Simultaneous acquisition of current/potential and up to 8 peripheral analog signals
  • Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory
  • Applicable scanrates: 1µV/s to 10,000 V/s
  • Minimum interval time/resolution: 10µs
  • Result optimisation by automated tuned filters, gain amplifiers and dc-subtraction


The IviumStat.XRe is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software, allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is included as standard with each instrument.

 Read the full description


System performance
Current compliance
Maximum output voltage
Electrode connections
4; WE, CE, RE, S (and GND) with 4mm banana plugs
Potentiostat bandwidth
8MHz for small signals, 300kHz for large signals
Stability settings
High Speed, Standard and High Stability
Programmable response filter
1MHz, 100kHz, 10kHz, 1kHz, 10Hz
Signal acquisition
Dual channel 24bit ADC, 100,000 samples/s
Applied potential range
±10V/±50V with 0.02mV/0.1mV res. (20bit)
Applied potential accuracy
0.2% or 1mV
Current ranges
±10nA to ±10A in 10 decades
High sensitivity current ranges
±1pA, ±10pA, ±100pA, ±1nA
Measured current resolution
0.00001% of current range, minimum 0.6aA
Measured current accuracy
Applied current resolution
0.00013% of applied current range
Applied current accuracy
Potential ranges
±1mV, ±10mV, ±100mV, ±1V, ±10V, ±50V
Measured potential resolution
0.00001% of potential range, minimum 0.15nV
Measured potential accuracy
0.2% or 1mV
Impedance Analyser
Frequency range
10µHz to 8MHz
0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset
16bit DC offset subtraction and 2 DC-decoupling filters
Dynamic range
0.05nV to 50V and 0.2aA to 2A
Input impedance
>1000Gohm //<8pF
Input bias current
Special functions
Ohmic drop compensation
2V/current range, 16bit resolution
Safety features
Automatic disconnect on internal/external limits
Peripheral connections
Analog in/out
8/2 (0 to +4V, 16bit resolution)
Digital input/output
2/3 (0 to +5V)
Analog monitor for cell current and potential
±0.5V sinewave 10µHz-8MHz with variable attenuation
Channel-X input, Channel-Y input
+4V: to record impedance from peripheral devices
Power requirements
100-240V, 45-63Hz, 300VA
Size (w x d x h)
26 x 33 x 12cm
PC requirements
Windows 7/8/10, with free USB port
Specifications subject to change, Ivium Technologies ©2018

Model comparison

IviumStat.h standard
System performance
Product Current compliance
Product Maximum output voltage
±10V below 1A, and ±8V up to 5A
Product Applied potential range
±10V, 0.02mV res. (20bit)
±10V, 0.02mV res. (20bit)
±10V/±50V with 0.02mV/0.1mV res. (20bit)
Product Potential ranges
±1mV, ±10mV, ±100mV, ±1V, ±10V
±1mV, ±10mV, ±100mV, ±1V, ±10V
±1mV, ±10mV, ±100mV, ±1V, ±10V, ±50V
Impedance Analyser
Product Dynamic range
0.05nV to 10V, and 0.2aA to 5A
0.05nV to 10V, and 0.2aA to 5A
0.05nV to 50V and 0.2aA to 2A
Product Power requirements
100-240V, 47-63Hz, 150VA
100-240V, 45-63Hz, 300VA
100-240V, 45-63Hz, 300VA
Product Weight
We dispatch worldwide

For purchases that exceeds $100